Most ceramic lined elbows fail at the joints.
CeraLine™ doesn't have any.
CeraLine is a one piece, precision cast ceramic liner with smooth bore and constant wall thickness. No tiles. No epoxy joints. No failure points. Custom engineered in silicon carbide, alumina, and other advanced ceramics, for any size, any angle, any application.
✓ Jointless one piece design
✓ Custom Engineered
✓ SiC available
✓ ANSI & Victaulic compatible
The joints make the difference.
| Tiled / Segmented Ceramic | CeraLine by Blasch | |
|---|---|---|
| Design | Many tiles + epoxy joints | One-piece cast ceramic |
| Bore | Interrupted, uneven | Smooth bore, constant wall |
| Failure mode | Joints erode first | No joints to erode |
| Pressure drop | Higher (turbulence at joints) | Minimal |
| Wear pattern | Unpredictable | Consistent, predictable |
| Customization | Complex | Drop-in, no modifications |
Engineered to your exact specifications
CeraLine Elbows:
Long Radius: 45°, 90°, 180° and custom
Short Radius: 45°, 90°, 180° and custom
Wall thickness: ¼" to 6"
ID: ½" to several feet
End configurations: ANSI flanges, Victaulic, weld on, slip on, threaded
CeraLine Pipe and Spool Liners:
Length: Up to 7ft
Diameter: Up to 3ft
Wall thickness: ¼" to 8"
Features: Shiplaps, tongue & groove, anti vortexing, internal spinner
Additional CeraLine Components:
Tees, Wyes, Laterals, Reducers, Choke Rings, Transitions, Victaulic assemblies
From your measurements to your plant, here's how it works.
Step 1: Analysis
Tell us your application, media, temperature, velocity, pipe dimensions. Our engineers identify the root cause of your wear problem, no drawings needed to get started.
Step 2: Engineering
We design a custom CeraLine solution, right ceramic material, right wall thickness, right flange configuration, engineered from your measurements. No drawings required. If you have them, great. If not, our engineers work directly from your dimensions and create the necessary drawings. Either way, our engineers turn your measurements into a complete, ready-to-install solution.
Step 3: Installation
Drop in installation. No system modifications needed. Your CeraLine component fits exactly where your old pipe was.
- Power Generation, fly ash, bottom ash, pneumatic conveying
- Oil Refining, FCCU catalyst lines, slurry spools
- Mining, tailing lines, slurry transport
- Chemical Manufacturing, corrosive process streams
- Battery Manufacturing, highly corrosive production materials
- Sand Foundry, pneumatic sand conveyance
- Cement, bulk material transport, carbon injection
From the field
"CeraLine elbows last us 12 to 18 months vs. 3 months previously."
— Pet Coke Engineer
"CeraLine pipes and elbows last longer than any we've ever used or purchased."
— Major Floor Tile Manufacturer
Ready to specify CeraLine for your application?
Credentials
ISO 9001 Certified
ISO 9001 is the international standard that specifies requirements for a quality management system (QMS). Organizations use this standard to demonstrate the ability to consistently provide products and services that meet customer and regulatory requirements. The current version of ISO 9001 was released in September 2015 and Blasch is certified against this latest standard. The result is a solid system that passed the NQA registrar audit with the best results ever recorded for Blasch while establishing a solid risk management system, procedures that support their systems, and work instructions that employees can use as an effective training tool.
