Your Pipe isn’t the Problem. What’s Lining it is.
CeraLine by Blasch replaces coatings and steel with precision cast ceramic liners that last 8x longer. We don't just make them, we engineer each one to your measurements and your existing system. No drawings needed. No modifications needed.
No modifications needed.
Carbon Steel Elbow Blowout
Fully Intact CeraLine Elbow
Talk to an engineer about your application – no obligation!
✓ Custom engineered ✓ Drop in installation ✓ Proven in 10+ industries
Coating your pipe just delays the inevitable.
- When abrasive or corrosive media runs through your pipes at high velocity, a coating, no matter how thick, will eventually fail. The media doesn’t care about the paint. It cares about the path of least resistance.
- What actually works is a cast ceramic liner. Not sprayed on. Not tiles glued together. A precision cast, fully fired ceramic sleeve, at minimum ¼ inch thick, installed directly into your existing steel pipe.
- Your Blasch engineer analyzes your application, specifies the right ceramic material, and designs a solution that fits your exact dimensions and operating conditions, no engineering drawings required on your end.
Real plants. Real results.
8x
From 3 to 4 months to 30+ months, pneumatic ash conveying, power generation facility
10x+
From days to 12+ months, FCCU catalyst transfer line, European oil refinery
30 months
Only 10% ceramic wear at highest stress point, bagasse boiler, Guatemala
From your measurements to your plant, here's how it works.
Step 1: Analysis
Tell us your application, media, temperature, velocity, pipe dimensions. Our engineers identify the root cause of your wear problem, no drawings needed to get started.
Step 2: Engineering
We design a custom CeraLine solution, right ceramic material, right wall thickness, right flange configuration, engineered from your measurements. No drawings required. If you have them, great. If not, our engineers work directly from your dimensions and create the necessary drawings.
Step 3: Installation
Drop in installation. No system modifications needed. Your CeraLine component fits exactly where your old pipe was.
- Power Generation, fly ash, bottom ash, pneumatic conveying
- Oil Refining, FCCU catalyst lines, slurry spools
- Mining, tailing lines, slurry transport
- Chemical Manufacturing, corrosive process streams
- Battery Manufacturing, highly corrosive production materials
- Sand Foundry, pneumatic sand conveyance
- Cement, bulk material transport, carbon injection
Talk to an engineer about your application – no obligation!
Not a coating. A complete engineered piping solution.
✓ Smooth bore, jointless one piece design
✓ ¼” to 6” wall thickness
✓ Any size, any angle, 45°, 90°, 180° and custom
✓ Silicon Carbide, Alumina, and other advanced ceramics
✓ ANSI flanges, Victaulic compatible
✓ Elbows, spools, tees, reducers, choke rings and more
Still replacing the same elbow every few months? Let’s fix that permanently...
Tell us about your application. A Blasch engineer will reach out within one business day to discuss your options, no commitment required.
Talk to an engineer about your application – no obligation!
Credentials
ISO 9001 Certified
ISO 9001 is the international standard that specifies requirements for a quality management system (QMS). Organizations use this standard to demonstrate the ability to consistently provide products and services that meet customer and regulatory requirements. The current version of ISO 9001 was released in September 2015 and Blasch is certified against this latest standard. The result is a solid system that passed the NQA registrar audit with the best results ever recorded for Blasch while establishing a solid risk management system, procedures that support their systems, and work instructions that employees can use as an effective training tool.
